Kaze Master 3.5inch Fan Controller, Black Discontinued
Kaze Master 5.25inch Fan Controller, Silver Discontinued
Kaze Master 5.25inch Fan Controller, Black Discontinued
Kaze Master 3.5inch Fan Controller, Silver Discontinued
More variations available Show

Scythe Kaze Master Fan Controllers

Replaces the Scythe Kama Meter Interchangeable Colour 4-Channel Fan Controller

Replaced by the Scythe Kaze Master II Black Fan Controller, KM05-BK

The Kaze Master Fan Controllers are possibly the best looking fan controllers ever to grace our product range. When switched off, they look like a plain bezel apart from the dials. It is only when they are switched on that you see any type of display.

Kaze Master 5.25inch Black

The display shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Masters can! So if you only want a fan to run under certain circumstances then these could be your ideal fan controllers.

As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.

Kaze Master 5.25inch display

Features

Manual fan speed controller with temperature sensors
Controls up to four 3-pin or 4-pin (PWM) fans
Fail safe alarm - alarm sounds if fan fails
Able to completely stop the fan, if desired
Looks “fan”-tastic!

Show specifications and reviews for:

Specifications	Kaze Master 3.5 BK	Kaze Master 3.5 SL	Kaze Master 5.25 BK	Kaze Master 5.25 SL
Dimension	103 x 25 x 93 mm	103 x 25 x 93 mm	148.5 x 42.5 x 63 mm (WxHxD)	148.5 x 42.5 x 63 mm (WxHxD)
Display Dimension	60 x 15.5 mm	60 x 15.5 mm	114 x 20 mm	114 x 20 mm
Fan Channel	Two	Two	Four	Four
Temperature Module Channel	Two	Two	Four	Four
Weight	125g	125g	165g	165g
DC Input	5V or 12V (from PSU)	5V or 12V (from PSU)	5V or 12V (from PSU)	5V or 12V (from PSU)
Fan Adjustment Range	3.7V - 12V	3.7V - 12V	3.7V - 12V	3.7V - 12V
Maximum Fan Amp	1A per channel	1A per channel	1A per channel	1A per channel
Fan Speed Range	0 - 7500 RPM (Display Range: 30rpm Incremental)	0 - 7500 RPM (Display Range: 30rpm Incremental)	0 - 7500 RPM (Display Range: 30rpm Incremental)	0 - 7500 RPM (Display Range: 30rpm Incremental)
Temperature Range	0 - 100°C / 32 - 199.9°F	0 - 100°C / 32 - 199.9°F	0 - 100°C / 32 - 199.9°F	0 - 100°C / 32 - 199.9°F
Measurement Frequency	Every two seconds	Every two seconds	Every two seconds	Every two seconds
Warranty			24 months	24 months
EAN barcode			4571225041674

Specifications	Kaze Master 3.5 BK	Kaze Master 5.25 BK
Dimension	103 x 25 x 93 mm	148.5 x 42.5 x 63 mm (WxHxD)
Display Dimension	60 x 15.5 mm	114 x 20 mm
Fan Channel	Two	Four
Temperature Module Channel	Two	Four
Weight	125g	165g
DC Input	5V or 12V (from PSU)
Fan Adjustment Range	3.7V - 12V
Maximum Fan Amp	1A per channel
Fan Speed Range	0 - 7500 RPM (Display Range: 30rpm Incremental)
Temperature Range	0 - 100°C / 32 - 199.9°F
Measurement Frequency	Every two seconds
Warranty		24 months
EAN barcode		4571225041674

Customer Reviews

Kaze Master 3.5 BK

Kaze Master 5.25 SL

Kaze Master 5.25 BK

Kaze Master 3.5 SL

We haven't received any reviews of this product yet.

Gorgeous

Mike Payne, 29th December 2010

Nice looking piece of kit that does its job well. Rpm speed led is green and temp led is blue, both of which complement each other and look stunning. All leads (there are lots) are well marked and quite long (I got some extensions, but didn’t need them). And delivery service was great. Ordered on 20th December and received on the 23rd by cheapest postal option.