Cooltek V6 Mini-ITX Case, Silver

The elegant look of the V6 harmoniously imitates the design of popular audio components.

The design of compact ITX enclosures is always a challenge – as it is mandatory to achieve acceptable system temperatures while still fitting in as many components as possible in a very limited amount of space. The design of the V6 consequently follows this specification.

Thanks to the intelligent layout of the case, it is possible to install either four 3.5” or two 2.5” and two 3.5” HDD/SSDs. Two PCI expansion slots are available for the installation of a graphics cards. It can accommodate graphics cards with a maximum length of around 200mm.

The compact case is compatible with standard ATX power supplies. The power supply is mounted at the front of the case, the power supply power cable is then looped to the rear panel. When using ATX power supplies, CPU coolers with a maximum height of 65mm can be installed.

Especially for extensive systems with powerful processors and larger sized coolers we would generally advise the use of external power supplies or SFX power supplies, in order to maintain the best possible compatibility.

The advanced ventilation system of the V6 is specially designed for minimum noise and optimum ventilation. For an effective cooling system, both side panels are perforated in the lower area which provides improved air-flow particularly for the CPU cooler. In addition, the chassis front is designed in permeable mesh fabric, which effectively supports efficient ventilation.

A particularly quiet running 140mm fan is installed at the back of the case, which ensures constant air exchange inside the case. If necessary, up to three 60mm fans can be mounted behind the front cover, increasing the air flow significantly.

In the upper part of the case front, one USB 3.0 and one USB 2.0 port is available, as well as the obligatory HD audio ports (microphone and audio).

The production effort for this case is enormous and equivalent to a “full-blown” mid-tower chassis, with only the individual parts being smaller. The precisely manufactured components ensures the high quality that is reflected in the extremely strong impression that is given by this case. The lid is made from one piece of 0.8 mm thick SECC steel that covers the top and sides of the chassis. The main body of the case is manufactured from 0.6mm SECC steel, which gives the compact chassis excellent stability.

To assemble the hardware, only the one-piece case cover needs to be removed. Two HDD holders can be easily removed by loosening four screws. Both holders can accommodate two mass storage devices. The primary disk holder allows the decoupled mounting of either two 3.5” or two 2.5” HDD/SSDs. The secondary holder is equipped for two 3.5” or one 2.5” and one 3.5” HDD/SSD.

Finally, four Hi-Fi style rubber feet are included which gives the case a particularly classy look and effectively decouples it from a table or desk thus reducing any vibrations.

210 x 250 x 240 mm

210 x 250 x 240 mm